eBay Classifieds » All ads » Jobs » 

Construction & trades in Eastern North Carolina

(1-20 of 33 ads)
View as:
Categories
  1. Job Site Superintendent at WIMCO Corp

    WIMCO Corp is in need of a self-motivated construction superintendent with experience for on-site management of construction activities of commercial...

  2. Pipeline General Laborer at Jones Companies

    The Construction Laborer position is responsible for performing various duties on Pipeline construction and/or transportation projects....

  3. Utilities Distribution Shop Supervisor at North Carolina State University

    Operational experience with construction and demolition equipment and materials (excavator, tamper, ABC , fencing, barriers, etc.)....

  4. OBI - McKesson - OBI Architect at Perficient Inc

    Guide technical resources BI projects through design, construction, testing and implementation. This position will lead all stages of the construction of a BI...

  5. Chief Engineer at Jones Lang LaSalle

    High School diploma or GED equivalent, two years in mechanical trades, or equivalent. , PDU, generators, primary switch gear), cabling (data and voice, broad...

    Ads
    1. Custom Metal Fabrication Estimator

      Our estimator position is responsible for estimating and overseeing all projects to the highest levels of safety, quality, productivity, cost effectiveness, code compliance and timeliness. Our team members are seeking a highly motivated candidate to join our team as a full time Fabrication Estimator. In this role the ideal candidate will assist customers with designs, budgeting, costing and ...

    1. Installed Products Specialist at TruTeam-Spanish

      1-3 years construction experience preferred. Industry Specific (Construction, Insulation, Trades, etc.). The Installed Products Specialist is responsible for...

    1. Orbital Welder

      Enter job description...Perform orbital welding of tubing and componentsSet up and calibrate power supply with the correct welding program.Set up gas mixing equipment.Create and log weld coupons.Perform quality inspections.May perform tube preparation and manual/automatic tube cutting.Strong mechanical aptitude, attention to detail and ability to interpret engineering drawings.Welding ...

    1. Installed Products Specialist at TopBuild

      1-3 years construction experience preferred. Industry Specific (Construction, Insulation, Trades, etc.). The Installed Products Specialist is responsible for...

    1. Industrial Maintenance Tech

      Seeking an experienced Machine Maintenance Mechanic. This individual must have the ability to execute ordinary maintenance operations, be responsible for reducing equipment downtime and increase utilization, participates to the breakdown analysis for machinery and lines. Applicant must be able to contribute to the team effort by accomplishing related results as needed, train/assist operators ...

    1. Installed Products Specialist at TruTeam

      1-3 years construction experience preferred. Industry Specific (Construction, Insulation, Trades, etc.). The Installed Products Specialist is responsible for...

    1. Industrial Production Manager

      Seeking an experience Production Manager. Duties will include but not be limited to overseeing production, making manufacturing processes and making sure that production lines are running smoothly and efficiently. Will work closely with supervisors and maintenance staff to plan work, set targets and make sure the finished products meet quality standards.

    1. Welder/Inspector at AECOM

      Six years’ experience in the electrical trade performing maintenance and/or construction. High school, technical school, apprenticeship, trade school graduate...

    1. Warehouse Supervisor

      Seeking a Warehouse Supervisor. Qualified individual will be responsible for planning, organizing, monitoring the receiving, storage/distribution of all items received from suppliers or manufacturers. Manages all hourly Logistics operators. Must be able to manage warehouse activities, inventory accuracy and inventory bookkeeping. Responsible for interviewing and recommending applicants for ...

    1. Construction Manager at Cal Atlantic Group

      Manages Assistant Construction Managers; Manages trade partners and consultants; 4 years of relevant construction experience or education required....

    1. HR Manager

      Seeking a part time Human Resources Generalist. Qualified candidates must have prior experience in the Industrial or Warehouse industry. This individual will provide guidance, assistance and support management, supervisors and administrators, consult with managers and supervisors concerning individual employees or groups, identify and resolving employee-related matters, and providing guidance ...

    1. Account Manager at The Dow Chemical Company

      Engagement in industry trade associations to develop strategic relationships & promote DOW POWERHOUSE*. Experience in Building and Construction Industry and/or...

    1. HVAC Maintenance Trades Helper

      Job Title: 23580- Maintenance Trades HelperDepartment: HVACReports To: Mr. Mike Schell, HVAC SupervisorFLSA Status: NON-EXEMPTSalary Grade: $13.34/hr + 4.02/hr fringeApproved By: HUMAN RESOURCESGeneral Purpose of Job:The primary responsibilities of this position include general maintenance and repair of equipment and buildings requiring practical skill and knowledge (but not proficiency) in ...

    1. Field Representative (2 Positions) at DASNY - Dormitory Authority of the State of New York

      Including construction inspection or supervision of major public construction. Construction Management, or a construction industry related field plus five....

    1. HVAC & Sheet Metal Installers

      Seeking multiple experienced commercial HVAC/Sheet Metal installers to fill immediate needs in the Jacksonville area. Qualified candidates will have previous experience performing some or all of the following tasks:Setting and wiring in rooftop unitsInstalling duct workRunning linesBrazing solderingYou must have your own tools and reliable transportation. Ability to pass a pre-employment drug ...

    1. Database Encoder-Analyst/Civil Engineer at Black & Veatch

      Publication of engineering papers and articles in professional and trade journals is desirable. Performs work which involves conventional engineering practice...

    1. HVAC & Sheet Metal Installers

      Seeking multiple experienced commercial HVAC/Sheet Metal installers to fill immediate needs in the Greenville area. Qualified candidates will have previous experience performing some or all of the following tasks:Setting and wiring in rooftop unitsInstalling duct workRunning linesBrazing solderingYou must have your own tools and reliable transportation. Ability to pass a pre-employment drug ...

    1. Mechanical Construction Superintendent Overseas at American International Contractors, Inc.

      Construction methods, techniques, and standards. May supervise a specific craft or trade (mechanical);...

    1. Commercial Electricians, Top Helpers and Helpers

      Mechanic, top helper and helper levels needed for long term commercial project in the Jacksonville area.Commercial Electrician duties include, but not limited to:Commercial Electrician cuts, bends, and runs 1/2" & 3/4", 1" electrical conduit materialsCommercial Electrician should have experience bending offsets, 3 points, 4 points, saddles, kicks, 90's, etcCommercial Electrician pulls ...

    1. Managing Editor at UBM Tech

      The division also includes UBM Brazil’s market leading events in construction, cargo transportation, logistics & international trade, and agricultural...

    1. Commercial Electricians, Top Helpers and Helpers

      Mechanic, top helper and helper levels needed for long term commercial project in the Greenville area.Commercial Electrician duties include, but not limited to:Commercial Electrician cuts, bends, and runs 1/2" & 3/4", 1" electrical conduit materialsCommercial Electrician should have experience bending offsets, 3 points, 4 points, saddles, kicks, 90's, etcCommercial Electrician pulls ...

    2. Construction - Sales Manager for Mobile Tool Business (Full Training)

      Start building your career and future now!Mac Tools was founded in 1938 in Sabina, OH. Today, Mac Tools is an international business with Distributors and Franchisees in the United States, Canada, Europe and Japan and is part of Stanley Black & Decker, Inc., a brand synonymous with quality and impeccable customer service.Today, Mac Tools has a product line in excess of 42,000 items, and still ...

    3. Construction Equipment Field Mechanic

      Field Service Technician or Shop MechanicLarge Construction equipment dealer is looking for an experienced field technician. The qualified candidate will be a self-starter who can work with little to no supervision on heavy equipment. You must have your own tools, the service truck will be supplied for jobs. Competitive salary based upon experience, tools are insured by company (need tool ...

    4. Heavy Equipment Mechanic Shop

      Seaking Heavy Equipment Mechanic who has worked on a variety of construction machines excavators, backhoes, etc. T. Field Technician construction equipment mechanic jobs also

    5. Senior Environmental Health and Safety Manager

      Gilchrist Safety Solutions, LLC. is seeking a Senior EH&S Manufacturing Managers for placement in Ahoskie, North Carolina.The ideal candidate(s) will possess the CSP or ASP credential with 20+ years of experience in manufacturing safety. Each position requires the candidate to have the proven ability to take a safety program from inception to completion while continuing to develop a safety ...

    6. Construction QA Inspector - Greenville, NC

      Quality Built, LLC is a nationwide, award-winning organization providing construction inspection, forensic and risk management solutions to clients across the nation. We demonstrate our commitment to quality at the highest levels by being the only construction inspection services firm in the United States whose Quality Management System is ISO certified.We have an opportunity for a ...

    7. Electrical Mechanic

      Watson Electrical Construction Co. LLC is looking for motivated people for ELECTRICAL MECHANICS in the Greenville, NC area. Requires minimum 5 years COMMERCIAL experience with a valid driver's license and high school diploma/GED. Position requires working both productively and safely to achieve Company goals and objectives. We encourage career goals, and willingness to train and learn is a ...

    8. FURNITURE REPAIR TECHNICIAN

      ~~~~Due to EXPANSIVE GROWTH, our family-based furniture repair company has an immediate opening for a FURNITURE REPAIR TECHNICIAN (independent contractor) for in home furniture repairs.*** No "inspection specialists" need apply! ***Qualifications:• Candidate must be able to maintain a high job completion ratio.• Experience in all aspects of furniture repair including basic upholstery skills, ...

    9. CNC Machine Operator

      Job Responsibilities:Set up, adjust, and operate CNC mills to machine parts to print specifications.Change tools as required.Clean metal shavings from inside machine and work area.Use a drill press for miscellaneous operations.Deburr parts as needed.Inspect parts per print.Perform cleaning and preventive maintenance tasks on machine and work area daily.Perform other related duties as assigned ...

    10. Sheet Metal Installers and Helpers

      We are looking for sheet metal installers with integrity, who take pride in their work and safely perform HVAC installations within the framework of the commercial construction industry.Commercial sheet metal Installers with any of the following skills are encouraged to apply with us:• Determine layout of systems and read blueprints• Measure and mark sheet metal according to template• Operate ...

      1. Engineer III at Winston-Salem Marriott

        Perform all essential functions of Class II Engineer plus special skills in a particular trade:. High school diploma, plus two years or its equivalent in trade...

      2. Grading Foreman at Blythe Construction Inc

        For 90 years, the professional men and women of Blythe Construction, Inc. From large interstate highways to small commercial site development, Blythe...

      3. Construction Coordinator at Southminster

        Southminster Retirement Community, a leader in non-profit continuing care retirement is currently seeking a highly motivated construction professional to join...

      4. Residential Conservation Specialist (QA) at DNV GL

        Associates degree or related experience in energy, building sciences or construction trades. Driven by our purpose of safeguarding life, property and the...

      5. Energy Specialist at Franklin Energy Services, LLC

        Promote the energy efficiency program to customers and trade allies within your assigned territory. From individual utility customers and construction...